2015 Annual Progress Report
III. Hydrogen Delivery
This section of the 2015 Annual Progress Report for the DOE Hydrogen and Fuel Cells Program focuses on hydrogen delivery.
Hydrogen Delivery Sub-Program Overview, Erika Sutherland, U.S. Department of Energy
- Hydrogen Delivery Infrastructure Analysis, Amgad Elgowainy, Argonne National Laboratory
- Vessel Design and Fabrication Technology for Stationary High-Pressure Hydrogen Storage, Zhili Feng, Oak Ridge National Laboratory
- Hydrogen Embrittlement of Structural Steels, Brian Somerday, Sandia National Laboratories
- Fiber-Reinforced Composite Pipelines, George Rawls, Savannah River National Laboratory
- Development of High-Pressure Hydrogen Storage Tank for Storage and Gaseous Truck Delivery, Don Baldwin, Hexagon Lincoln
- Cryogenically Flexible, Low Permeability H2 Delivery Hose, Jennifer Lalli, NanoSonic
- Hydrogen Compression Application of the Linear Motor Reciprocating Compressor (LMRC), Eugene Broerman, Southwest Research Institute
- Steel Concrete Composite Vessel for 875 Bar Stationary Hydrogen Storage, Zhili Feng, Oak Ridge National Laboratory
- Low-Cost Hydrogen Storage at 875 Bar Using Steel Liner and Steel Wire Wrap, Amit Prakash, WireTough Cylinders
- Electrochemical Hydrogen Compressor, Ludwig Lipp, FuelCell Energy, Inc.
- Reference Station Design, Danny Terlip, National Renewable Energy Laboratory, and Joe Pratt, Sandia National Laboratories
- Hydrogen Fueling Station Pre-Cooling Analysis, Amgad Elgowainy, Argonne National Laboratory
- 700-Bar Hydrogen Dispenser Hose Reliability Improvement, Kevin Harrison, National Renewable Energy Laboratory
- Magnetocaloric Hydrogen Liquefaction, Jun Cui, Pacific Northwest National Laboratory