2012 Annual Merit Review Proceedings

Hydrogen Production and Delivery

These presentations and posters from the Hydrogen Production and Delivery session at the Annual Merit Review in May 2012 are available as Adobe Acrobat PDFs.

Overview of Hydrogen Production, Eric Miller, DOE
Overview of Hydrogen Delivery, Scott Weil, DOE

Hydrogen Production and Delivery Presentations

  1. Distributed Bio-Derived Liquids Production
  2. High-Temperature Thermochemical
  3. Hydrogen Delivery
  4. Electrolysis
  5. Photoelectrochemical
  6. Biological
  7. Biomass Gasification
  8. Separations

A. Distributed Bio-Derived Liquids Production

  1. Biomass-Derived Liquids Distributed (Aqueous Phase) Reforming, David King, PNNL
  2. Distributed Bio-Oil Reforming, Stefan Czernik, NREL

Back to Top

B. High-Temperature Thermochemical

  1. Electrolyzer Development for the Cu-Cl Thermochemical Cycle, Michele Lewis, PSU
  2. Solar High-Temperature Water Splitting Cycle with Quantum Boost, Robin Taylor, SAIC
  3. Solar-Thermal ALD Ferrite-Based Water Splitting Cycles, Al Weimer, University of Colorado
  4. Solar Hydrogen Production with a Metal Oxide Based Thermochemical Cycle, Ivan Ermanoski, SNL

Back to Top

C. Hydrogen Delivery

  1. Hydrogen Delivery Infrastructure Analysis, Marianne Mintz, ANL
  2. Oil-Free Centrifugal Hydrogen Compression Technology Demonstration, Hooshang Heshmat, Mohawk Innovative Technology
  3. Development of a Centrifugal Hydrogen Pipeline Gas Compressor, Frank Di Bella, Concepts NREC
  4. Development of High Pressure Hydrogen Storage Tank for Storage and Gaseous Truck Delivery, Don Baldwin, Lincoln Composites
  5. Fiber Reinforced Composite Pipelines, Thad Adams, SRNL
  6. Composite Pipeline Technology for Hydrogen Delivery, Barton Smith, ORNL
  7. Hydrogen Embrittlement of Structural Steels, Brian Somerday, SNL
  8. Electrochemical Hydrogen Compressor, Ludwig Lipp, FuelCell Energy, Inc.
  9. Vessel Design and Fabrication Technology for Stationary High-Pressure Hydrogen Storage, Wei Zhang, ORNL

Back to Top

D. Electrolysis

  1. High-Capacity, High Pressure Electrolysis System with Renewable Power Sources, Paul Dunn, Avalence LLC
  2. PEM Electrolyzer Incorporating an Advanced Low Cost Membrane, Monjid Hamdan, Giner Electrochemical Systems, LLC
  3. Renewable Electrolysis Integrated System Development and Testing, Kevin Harrison, NREL
  4. High Performance, Low Cost Hydrogen Generation from Renewable Energy, Katherine Ayers, Proton OnSite

Back to Top

E. Photoelectrochemical

  1. Directed Nano-Scale and Macro-Scale Architectures for Semiconductor Absorbers and Transparent Conducting Substrates for Photoelectrochemical Water Splitting, Thomas Jaramillo, Stanford University/NREL
  2. Semiconductor Materials for Photoelectrolysis, John Turner, NREL
  3. Photoelectrochemical Hydrogen Production, Arun Madan, MVSystems/HNEI

Back to Top

F. Biological

  1. Maximizing Light Utilization Efficiency and Hydrogen Production in Microalgal Cultures, Tasios Melis, UC Berkeley
  2. Biological Systems for Hydrogen Photoproduction, Maria Ghirardi, NREL
  3. Fermentation and Electrohydrogenic Approaches to Hydrogen Production, Pin-Ching Maness, NREL
  4. Hydrogen from Water in a Novel Recombinant Oxygen-Tolerant Cyanobacterial System, Phil Weyman, J. Craig Venter Institute

Back to Top

G. Biomass Gasification

  1. One Step Biomass Gas Reforming-Shift Separation Membrane Reactor, Mike Roberts, Gas Technology Institute

Back to Top

H. Separations

  1. Development of Hydrogen Selective Membranes/Modules as Reactors/Separators for Distributed Hydrogen Production, Paul Liu, Media and Process Technology Inc.

Back to Top

Hydrogen Production and Delivery Posters

  1. Hydrogen Delivery
  2. Photoelectrochemical
  3. Production
  4. Electrolysis
  5. Separations

A. Hydrogen Delivery

  1. Inexpensive Delivery of Cold Hydrogen in Glass Fiber Composite Pressure Vessels, Andrew Weisberg, LLNL
  2. H2A Hydrogen Production Analysis Model Version 3, Darlene Steward, NREL

Back to Top

B. Photoelectrochemical

  1. Surface Validation: Physical and Electronic Characterization of Materials for Photoelectrochemical Hydrogen Production, Clemens Heske, University of Nevada Las Vegas
  2. PEC Materials: Theory and Modeling, Muhammad Huda, University of Texas at Arlington
  3. Critical Research for Cost-Effective Photoelectrochemical Production of Hydrogen, Liwei Xu, Midwest Optoelectronics, LLC
  4. Characterization and Optimization of Photoelectrode Surfaces for Solar-to-Chemical Fuel Conversion, Tadashi Ogitsu, LLNL/NREL
  5. Photoelectrochemical Generation of Hydrogen from Water Using Nanotube-Based Semiconductor Systems for Improved Visible Light Activity, Mano Misra, University of Nevada Reno
  6. Solar Energy Utilization, Ravi Subramanian, University of Nevada Reno
  7. Novel Photocatalytic Metal Oxides, Robert Smith, University of Nebraska - Omaha

Back to Top

C. Production

  1. Unitized Design for Home Refueling Appliance for Hydrogen Generation to 5,000 psi, Timothy Norman, Giner Electrochemical Systems, LLC
  2. Hydrogen by Wire - Home Fueling System, Luke Dalton, Proton OnSite

Back to Top

D. Electrolysis

  1. Process Intensification of Hydrogen Unit Operations Using an Electrochemical Device, Glenn Eisman, H2 Pump LLC
  2. Hour-by-Hour Cost Modeling of Optimized Central Wind-Based Water Electrolysis Production, Chris Ainscough, NREL
  3. Low Cost Large Scale PEM Electrolysis for Renewable Energy Storage, Katherine Ayers, Proton OnSite

Back to Top

E. Separations

  1. Bio-Fueled Solid Oxide Fuel Cells, Gokhan Alptekin, TDA Research

To locate posters and presentations from other meeting sessions, go to the main page of the 2012 Annual Merit Review Proceedings.