2012 Annual Merit Review Proceedings

Hydrogen Storage

These presentations and posters from the Hydrogen Storage session at the Annual Merit Review in May 2012 are available as Adobe Acrobat PDFs.

Overview of Hydrogen Storage, Ned Stetson, DOE

Hydrogen Storage Presentations

  1. Storage Testing, Safety, and Analysis
  2. HSECoE
  3. Sorption
  4. Metal Hydride
  5. Chemical Hydrogen
  6. Tanks

A. Storage Testing, Safety, and Analysis

  1. System Level Analysis of Hydrogen Storage Options, Rajesh Ahluwalia, ANL
  2. Hydrogen Storage Cost Analysis, Preliminary Results, Brian James, Strategic Analysis, Inc.

Back to Top

B. HSECoE

  1. Hydrogen Storage Engineering Center of Excellence, Don Anton, SRNL
  2. Systems Engineering of Chemical Hydrogen, Pressure Vessel, and Balance of Plant for On-Board Hydrogen Storage, Jamie Holladay, PNNL
  3. Advancement of Systems Designs and Key Engineering Technologies for Materials Based Hydrogen Storage, Bart van Hassel, UTRC
  4. Chemical Hydride Rate Modeling, Validation, and System Demonstration, Troy Semelsberger, LANL
  5. System Design, Analysis, Modeling, and Media Engineering Properties for Hydrogen Energy Storage, Matthew Thornton, NREL
  6. Thermal Management of On-Board Cryogenic Hydrogen Storage Systems, Darsh Kumar, General Motors
  7. Ford/BASF-SE/UM Activities in Support of the Hydrogen Storage Engineering Center of Excellence, Mike Veenstra, Ford Motor
  8. SRNL Technical Work Scope for the Hydrogen Storage Engineering Center of Excellence: Design and Testing of Metal Hydride and Adsorbent Systems, Ted Motyka, SRNL
  9. Key Technologies, Thermal Management, and Prototype Testing for Advanced Solid-State Hydrogen Storage Systems, Joseph Reiter, NASA JPL
  10. Microscale Enhancement of Heat and Mass Transfer for Hydrogen Energy Storage, Kevin Drost, Oregon State University Development of Improved Composite Pressure Vessels for Hydrogen Storage, Norman Newhouse, Lincoln Composites

Back to Top

C. Sorption

  1. Hydrogen Sorbent Measurement Qualification and Characterization, Phil Parilla, NREL
  2. Improving Porosity and H2-Affinity of Porous Framework Materials, Joe Zhou, Texas A&M University
  3. Multiply Surface-Functionalized Nanoporous Carbon for Vehicular Hydrogen Storage, Peter Pfeifer, University of Missouri
  4. Weak Chemisorption Validation, Thomas Gennett, NREL
  5. A Joint Theory and Experimental Project in the Synthesis and Testing of Porous COFs for On-Board Vehicular Hydrogen Storage, Omar Yaghi, Caltech
  6. New Carbon-Based Porous Materials with Increased Heats of Adsorption for Hydrogen Storage, Randy Snurr, Northwestern University
  7. Hydrogen Trapping through Designer Hydrogen Spillover Molecules with Reversible Temperature and Pressure-Induced Switching, Angela Lueking, Penn State University

Back to Top

D. Metal Hydride

  1. Design of Novel Multi-Component Metal Hydride-Based Mixtures for Hydrogen Storage, Christopher Wolverton, Northwestern University
  2. Advanced, High-Capacity Reversible Metal Hydrides, Craig Jensen, University of Hawaii
  3. Hydrogen Storage Materials for Fuel Cell Powered Vehicles, Andrew Goudy, Delaware State University

Back to Top

E. Chemical Hydrogen

  1. Hydrogen Storage by Novel CBN Heterocycle Materials, Shih-Yuan Liu, University of Oregon
  2. Fluid Phase H2 Storage Material Development, Benjamin Davis, LANL
  3. Development of a Practical Hydrogen Storage System based on Liquid Organic Hydrogen Carriers and a Homogeneous Catalyst, Craig Jensen, Hawaii Hydrogen Carriers, LLC

Back to Top

F. Tanks

  1. Lifecycle Verification of Polymer Liners in Storage Tanks, Barton Smith, ORNL
  2. Melt Processable PAN Precursor for High Strength, Low-Cost Carbon Fibers, Felix Paulauskas, ORNL
  3. Development of Low-Cost, High Strength Commercial Textile Precursor (PAN-MA), Dave Warren, ORNL

Back to Top

Hydrogen Storage Posters

  1. Metal Hydride
  2. Storage Testing, Safety, and Analysis
  3. Cross-Cutting
  4. Sorption
  5. Chemical Hydrogen
  6. Tanks

A. Metal Hydride

  1. Aluminum Hydride, Jim Wegrzyn, BNL
  2. Electrochemical Reversible Formation of Alane, Ragaiy Zidan, SRNL

Back to Top

B. Storage Testing, Safety, and Analysis

  1. Best Practices for Characterizing Engineering Properties of Hydrogen Storage Materials, Karl Gross, H2 Technology Consulting LLC

Back to Top

C. Cross-Cutting

  1. Glasses and Nanocomposites for Hydrogen Storage, Kristina Lipinska-Kalita, University of Nevada Las Vegas

Back to Top

D. Sorption

  1. Room Temperature Hydrogen Storage in Nano-Confined Liquids, John Vajo, HRL Laboratories, LLC
  2. Hydrogen Storage in Metal-Organic Frameworks, Jeffrey Long, LBNL
  3. The Quantum Effects of Pore Structure on Hydrogen Adsorption, Raina Olsen, ORNL

Back to Top

E. Chemical Hydrogen

  1. Novel Carbon(C)-Boron(B)-Nitrogen(N)-Containing H2 Storage Materials, Shih-Yuan Liu, University of Oregon

Back to Top

F. Tanks

  1. Enhanced Materials and Design Parameters for Reducing the Cost of Hydrogen Storage Tanks, Kevin Simmons, PNNL
  2. Ultra Lightweight High Pressure Hydrogen Fuel Tanks Reinforced with Carbon Nanotubes, Dongsheng Mao, Applied Nanotech, Inc.
  3. Alternative Fiber Evaluation and Optimization of Filament Winding, Mark Leavitt, Quantum Fuel Systems Technologies Worldwide

Back to Top

To locate posters and presentations from other meeting sessions, go to the main page of the 2012 Annual Merit Review Proceedings.