2015 Annual Merit Review Proceedings

Hydrogen Storage

View presentations and posters from the Hydrogen Storage session at the Annual Merit Review in June 2015.

Hydrogen Storage Overview, Ned Stetson, U.S. Department of Energy

Hydrogen Storage Presentations

  1. Testing and Analysis
  2. Engineering – HSECoE
  3. Materials – Chemical
  4. Advanced Tanks
  5. Materials – Sorption
  6. Advanced Tanks – Balance of Plant

A. Testing and Analysis

  1. System Level Analysis of Hydrogen Storage Options, Rajesh Ahluwalia, Argonne National Laboratory
  2. Hydrogen Storage Cost Analysis, Brian James, Strategic Analysis, Inc.

Back to Top

B. Engineering – HSECoE

  1. Hydrogen Storage Engineering Center of Excellence, Don Anton, Savannah River National Laboratory
  2. Systems Engineering of Chemical Hydrogen, Pressure Vessel, and Balance of Plant for On-Board Hydrogen Storage, Kriston Brooks, Pacific Northwest National Laboratory
  3. Advancement of Systems Designs and Key Engineering Technologies for Materials Based Hydrogen Storage, Bart van Hassel, United Technologies Research Center
  4. System Design, Analysis, and Modeling for Hydrogen Storage Systems, Matthew Thornton, National Renewable Energy Laboratory
  5. Ford/BASF-SE/UM Activities in Support of the Hydrogen Storage Engineering Center of Excellence, Mike Veenstra, Ford Motor Company
  6. Savannah River National Laboratory Technical Work Scope for the Hydrogen Storage Engineering Center of Excellence: Design and Testing of Adsorbent Storage, Bruce Hardy, Savannah River National Laboratory
  7. Microscale Enhancement of Heat and Mass Transfer for Hydrogen Energy Storage, Kevin Drost, Oregon State University

Back to Top

C. Materials – Chemical

  1. Reversible Formation of Alane, Ragaiy Zidan, Savannah River National Laboratory
  2. Novel Carbon(C)-Boron(B)-Nitrogen(N)-Containing H2 Storage Materials, Shih-Yuan Liu, Boston College
  3. Low-Cost α-Alane for Hydrogen Storage, Richard Martin, Ardica
  4. Boron-Based Hydrogen Storage: Ternary Borides and Beyond, John Vajo, HRL Laboratories
  5. Improving the Kinetics and Thermodynamics of Mg(BH4)2 for Hydrogen Storage, Brandon Wood, Lawrence Livermore National Laboratory

Back to Top

D. Advanced Tanks

  1. Melt Processable PAN Precursor for High-Strength, Low-Cost Carbon Fibers, Felix Paulauskas, Oak Ridge National Laboratory
  2. Enhanced Materials and Design Parameters for Reducing the Cost of Hydrogen Storage Tanks, David Gotthold, Pacific Northwest National Laboratory
  3. Thermomechanical Cycling of Thin Liner High Fiber Fraction Cryogenic Pressure Vessels Rapidly Refueled by LH2 Pump to 700 Bar, Salvador Aceves, Lawrence Livermore National Laboratory
  4. Next Generation Hydrogen Storage Vessels Enabled by Carbon Fiber Infusion with a Low-Viscosity, High-Toughness Resin System, Brian Edgecombe, Materia
  5. Achieving Hydrogen Storage Goals Through High-Strength Fiber Glass, Hong Li, PPG Industries

Back to Top

E. Materials – Sorption

  1. Hydrogen Storage in Metal-Organic Frameworks, Jeffrey Long, Lawrence Berkeley National Laboratory

Back to Top

F. Advanced Tanks – Balance of Plant

  1. Innovative Development, Selection, and Testing to Reduce Cost and Weight of Materials for BOP Components, Chris San Marchi, Sandia National Laboratories

Back to Top

Hydrogen Storage Posters

  1. Engineering – HSECoE
  2. Materials – Sorption
  3. Materials – Metal Hydrides
  4. Advanced Tanks

A. Engineering – HSECoE

  1. Chemical Hydrogen Rate Modeling, Validation, and System Demonstration, Troy Semelsberger, Los Alamos National Laboratory
  2. Testing, Modeling, and Evaluation of Innovative Hydrogen Storage System Designs, Mei Cai, General Motors
  3. Development of Improved Composite Pressure Vessels for Hydrogen Storage, Norman Newhouse, Hexagon Lincoln

Back to Top

B. Materials – Sorption

  1. Hydrogen Sorbent Measurement Qualification and Characterization, Phil Parilla, National Renewable Energy Laboratory
  2. Design and Synthesis of Materials with High Capacities for Hydrogen Physisorption, Brent Fultz, California Institute of Technology
  3. High-Capacity and Low-Cost Hydrogen-Storage Sorbents for Automotive Applications, Hong-Cai (Joe) Zhou, Texas A&M University
  4. Hydrogen Adsorbents with High Volumetric Density: New Materials and System Projections, Don Siegel, University of Michigan

Back to Top

C. Materials – Metal Hydrides

  1. Neutron Characterization in Support of the DOE Hydrogen Storage Sub-Program, Terry Udovic, National Institute of Standards and Technology
  2. High-Capacity Hydrogen Storage Systems via Mechanochemistry, Vitalij Pecharsky, Ames Laboratory

Back to Top

D. Advanced Tanks

  1. Optimizing the Cost and Performance of Composite Cylinders for H2 Storage Using a Graded Construction, Andrea Haight, Composite Technology Development
  2. Conformable Hydrogen Storage Coil Reservoir, Erik Bigelow, Center for Transportation and the Environment

Back to Top

To locate posters and presentations from other meeting sessions, go to the main page of the 2015 Annual Merit Review Proceedings.